|
|
Hogentogler & Co. Inc.
P.O. Box 2219
Columbia, MD 21045
USA
|
|
Toll Free (US Orders):
1.800.638.8582
|
|
All Other Inquiries:
1.410.381.2390
|
|
Fax:
1.410.381.2398
|
|
|
|
|
|
|
¡Se habla Español!
|
|
|
Looking for the best drainage Material? Hogentogler recommends:
|
 |
|
www.smartdrain.com
|
|
|
To view online documentation you need Adobe Acrobat Reader® version 4.0 or later
|
 |
|
|
|
| |
8" Sieve Shakers
|
| |
|
| |
8" Sieve Shakers
8" SS-15 Sieve Tester is a budget, portable, 8" / 203mm sieve shaker designed to outperform other comparably priced equipment. The 1/4-hp unit is widely accepted by state transportation departments for highway materials testing. Back and forth lateral motion is combined with up and down and tilting motions to cause test material to travel in an orbit on the sieve surfaces. This forced travel assures full use of sieve mesh area without precise leveling of the tester. The SS-15 is recommended primarily for No. 4 to No. 200 size range, but may be used with larger material sizes when specifications for sieve loading and sample quantities permit. The Tester holds 6 full-height sieves and pan or 13 half-height sieves and pan. Clamp bar with attached cover secures sieves. The 15-minute timer has an adjustable knob-stop for improved repeatability, and a "hold" feature for continuous running. Freestanding operation is normal, but may be mounted via holes provided in bottom end flanges.
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
SS-15
|
8"
|
6
|
N/A
|
13
|
115 V / 60 Hz
|
$755.00
|
|
|
| |
|
| |
RX-812 Coarse Sieve Shakers
|
| |
|
| |
RX-812 Coarse Sieve Shakers
Designed to be used in coarse testing applications, the affordable RX-812 Coarse Sieve Shaker has unique capability of using both 8" diameter and 12" diameter test sieves, simply by using the quick-change adapters provided. The RX-812 has a quet operation and utilizes an effective "action" that gives consistent, accurate results.
- For test sieve analysis ranging in particle size from 4" opening through 150 micron (USA No. 100)
- Equipped with adapters to process both 8" and 12" diameter test sieves
- Features digital 99-minute timer/clock, accurate to 0.1 second
- Quiet operation, consistent, accurate results
- Oscillations per Minute: 280 (60 Hz); 231 (50 Hz)
- Not recomended for analysis with particles 150 micron (100 mesh and finer) and smaller
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
RX-812
|
8" and 12"
|
6 for 8" / 4 for 12" Sieves
|
6 for 12" Sieves
|
13 for 8" / 8 for 12" Sieves
|
110 V / 60 Hz
|
$975.00
|
|
RX-812-1
|
8" and 12"
|
6 for 8" / 4 for 12" Sieves
|
6 for 12" Sieves
|
13 for 8" / 8 for 12" Sieves
|
220 V / 60 Hz
|
$975.00
|
|
RX-812-3
|
8" and 12"
|
6 for 8" / 4 for 12" Sieves
|
6 for 12" Sieves
|
13 for 8" / 8 for 12" Sieves
|
220 V / 50 Hz
|
$975.00
|
|
|
| |
|
| |
3" Sieve Shakers
|
| |
|
| |
3" Sieve Shakers
3" / 76 mm Sieve Shaker is designed for small samples of chemicals, minerals, pharmaceuticals, powdered metals, cosmetics, abrasives, ores, foods, and other fine powders. Useful range is 75 µm - 4.75 mm (No. 200 to No. 4 sieve sizes) with woven wire sieves, but many materials may be sized smaller using electroformed sieves.
High frequency, 3600 vpm, electromagnetic vibratory action with 0-100% amplitude control is ideal for fine particle separations. Inline solenoid-actuated tapping action may be used during vibration (60 taps/min.) to speed dry separations. Also use the tap separately for tap-settling and bulk density tests. During dry sieving, the tapping action redistributes the sample on the sieves, and breaks static blinding, helping to clear undersize particles rapidly.
Model SS-3 includes a platform assembly for up to seven full-height. 3" / 76 mm metal sieves and pan or 14 acrylic sieves and pan. The unique sieve clamping mechanism makes insertion and removal of the sieve stack simple and convenient, yet holds the sieves snugly during operation. The captive knobs on the clamping mechanism allow it to be raised with a quick twist, releasing the sieves. The mechanism remains at this height until the knobs are twisted in the opposite direction clamping the sieves in place. The Performer III’s compact size, small footprint, and quiet operation make it an extremely desirable instrument for dry powder sample separations.
Model SS-3 features include an attractive, but rugged coated steel case, on/off controls for vibration and a manual/timed mode switch. A digital timer showing time set and time remaining, the numbered vibration control knob, and simple, efficient electromagnetic vibratory action enable the Performer III to give reliable, repeatable results. Optional stackable acrylic 3" / 76 mm see-through cylinder is helpful for observing sample action while leveling platform or for setting vibration.
- Quiet, electromagnetic vibratory action
- 0-100% amplitude control
- Switchable tapping action
- Precise digital timing
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
SS-3
|
3"
|
7
|
N/A
|
14
|
115 V / 60 Hz
|
$1,264.00
|
|
|
| |
|
| |
G2127 Heavy Duty Shaker
|
| |
|
| |
G2127 Heavy Duty Shaker
The G2127 Heavy Duty motorized sieve shaker holds up to 10 full height 2" deep, 20 half height 1" deep plus pan and cover. The shaker has a three way shaking action. Each revolution imparts a horizontal and vertical movement and a jolting action. The platform moves side to side with a jolt at each change of direction, plus a slight upward movement. This creates a quick efficient movement and separation of material. The unit is designed with Heavy Duty steel parts and there are no chains, belts, or flywheels, to wear out, which minimizes downtime and results in a longer lasting shaker.
- Can accomodate 8" and 12" Sieves
- Side to Side and tapping motions
- More capacity than most other sieve shakers
- Heavy duty tubular steel construction for rigidity and stability
- Heavy duty 1/3 horsepower motor
- Made in USA
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
G2127
|
8" and 12"
|
12 for 8" / 7 for 12" Sieves
|
N/A
|
20 for 8" / 12 for 12" Sieves
|
110 V / 60 Hz
|
$1,650.00
|
|
|
| |
|
| |
12"/8" Sieve Shakers
|
| |
|
| |
12"/8" Sieve Shakers
12"/8" Sieve Shakers provide sharpest repeatable separations in minimum time over the broadest possible range of particle sizes, shapes, and densities.
- Automatic 2-way Tapping: Automatically reverses "up" and "down" taps. "Up" taps mix, reorient, and redistribute sample so that new particles and new orientations are periodically presented to sieve surfaces. "Down" taps assist passing of near-size materials to the next sieve and clear the mesh for new particles.
- Perfect Circular Rotation of the Sieve Stack: Particles are forced to roll in all directions relative to the linear pattern of woven sieve mesh. Circular rotation is far superior to simple, inefficient back-and-forth actions that create "dead spots" where sample accumulates preventing complete seperation. Results obtained with other sieving motions may vary depending on positioning of individual sieve mesh pattern relative to direction of motion.
- Clamping: Exclusive 2-way sieve clamping system secures the integral cover assembly to two stainless steel guide rods by clamp knobs. The sieve stack is pressured vertically by the center knob. When loosened, the cover assembly slides on guide rods for easy repositioning to any sieve stack height.
- No Mounting Required: An internal counterbalance allows the unit to remain stationary without a permanent mounting. The unit may easily be moved around the lab or to another site. Adjustable footpads level the unit.
- Timer Control: Precision built-in digital LED timer repeats exactly by push-button start and resets automatically to any selected test time up to 59 min., 59 sec. A 5-sec. audible alarm sounds at zero, and another feature allows pauses without loss of test time.
- Precision digital LED reset timer repeats test times at the touch of a button.
- Holds up to 20 Sieves.
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
SS-8R
|
8"
|
10
|
N/A
|
20
|
115 V / 60 Hz
|
$1,849.00
|
|
SS-12R
|
8" and 12"
|
10 for 8" / 6 for 12" Sieves
|
N/A
|
20 for 8" / 13 for 12" Sieves
|
115 V / 60 Hz
|
$2,080.00
|
|
SS-8RF
|
8"
|
10
|
N/A
|
20
|
230 V / 50 Hz
|
$2,140.00
|
|
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX Sieve Shakers
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX Sieve Shakers
The Industry standard in test shakers, W.S. TYLER™ RO-TAP® RX has a unique two dimentional operation: a horizontal, circular motion and a vertical, topping motion. This special action allows material particles to stratify and "seek" critical openings in the test media. The result is the most accurate and consistent particle analysis testing.
- Heavy duty, stationary unit
- Features digital 99-minute timer/clock, accurate to 0.1 second
- Requires minimal maintenance
- Each unit test run and serialized prior to shipment
- Sound enclosure and test stand available (see Accessories)
- The RX-29 model designed for testing with 8" diameter test sieves; RX-30 model is designed for testing with 12" diameter test sieves
- Testing applications - RX-29: 2" down through 635 mesh (20 micron); RX-30: 5" down through 500 mesh (25 micron)
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
RX-29
|
8"
|
6
|
N/A
|
13
|
110 V / 60 Hz
|
$1,895.00
|
|
RX-29-16
|
8"
|
6
|
N/A
|
13
|
220 V / 60 Hz
|
$1,895.00
|
|
RX-29-10
|
8"
|
6
|
N/A
|
13
|
220 V / 50 Hz
|
$1,951.00
|
|
RX-30
|
12"
|
4
|
6
|
8
|
110 V / 60 Hz
|
$2,168.00
|
|
RX-30-16
|
12"
|
4
|
6
|
8
|
220 V / 60 Hz
|
$2,168.00
|
|
RX-30-10
|
12"
|
4
|
6
|
8
|
220 V / 50 Hz
|
$2,208.00
|
|
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX-94 Sieve Shakers
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX-94 Sieve Shakers
W.S. TYLER™ RO-TAP® RX-94 Test Sieve Shakers utilizes the same traditional design as the RX-29 and RX-30 models. In addition, the unit features a cavity that allows for two "stacks" of 8" diameter test sieves. This allows for twice the processing capacity in nominally the same time required to complete one test.
- Heavy duty, stationary unit
- Utilizes the same design as the RX-29
- Twice the capacity for testing in the same nominal time required as the RX-29
- Features digital 99-minute timer/clock, accurate to 0.1 second
- Sound enclosure and test stand available (see Accessories)
- Designed for testing with 8" diameter test sieves only
- Testing applications: 2" down through 635 mesh (20 micron)
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
RX-94
|
8"
|
2 Stacks of 6 Sieves
|
N/A
|
2 Stacks of 13 Sieves
|
110 V / 60 Hz
|
$3,169.00
|
|
RX-94-1
|
8"
|
2 Stacks of 6 Sieves
|
N/A
|
2 Stacks of 13 Sieves
|
220 V / 60 Hz
|
$3,169.00
|
|
RX-94-3
|
8"
|
2 Stacks of 6 Sieves
|
N/A
|
2 Stacks of 13 Sieves
|
220 V / 50 Hz
|
$3,169.00
|
|
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX-E Sieve Shakers
|
| |
|
| |
W.S. TYLER™ RO-TAP® RX-E Sieve Shakers
The W.S. TYLER™ RO-TAP® Electronic Test Sieve Shaker operates with 8" or 12" diameter Test Sieves and offers precise sieving results. The RX-29-E compact (8" Test Sieves) unit requires minimal space on a laboratory countertop and designed for light to medium testing applications. The RX-30-E (12" Test Sieves) model is a floor unit. Controls can be remotely mounted for convenient operation.
- Controlled Constant Amplitude
- Digital Controls
- Quick Release Hold Downs
- Fine and Coarse Analysis Control Settings
- See-Through Cover
- Quiet Operation
- Minimal Maintenance Required
|
|
|
| |
|
| |
(Click on Model Numbers for more info and ordering)
|
| |
|
MODEL NUMBER
|
SIEVE SIZE
|
NUMBER OF SIEVES
|
POWER
|
PRICE
|
|
|
Diameter
|
Full Height
|
Intermediate Height
|
Half Height
|
|
USD
|
|
RX-29-E-110
|
8"
|
9
|
N/A
|
15
|
110 V / 60 hz
|
$3,650.00
|
|
RX-30-E-110
|
12"
|
7
|
N/A
|
10
|
110 V / 60 hz
|
$5,516.00
|
|
RX-29-E-220
|
8"
|
9
|
N/A
|
15
|
220 V / 50 hz
|
$6,145.00
|
|
|
| |
|
|
