1.800.638.8582
SKU
7885-BT
  • $1,004.90
  • $1,480.00 You Save 32.10%

Description

DISCONTINUED BY MANUFACTURER, PLEASE CALL FOR ALTERNATIVES

The Avery Weigh-Tronix 7885-BT shipping scale has a capacity of 150 pounds with a readability of 0.05 pound and a 18 x 18 inch (Ball-Top) pan and is NTEP legal for trade. The low profile 7885 is a simple to use, durable, accurate and reliable, 18" x 18" bench base ideal for conveyor lines. The remote display can be placed in a convenient location to allow the user to view the weight, zero the scale or send weight data. This NTEP / Canadian approved scale fits into any operation as a stand-alone scale, interfaced to shipping manifest software or receiving station.
Designed with a hard wearing stainless steel weight platter and a rugged powder coated, carbon steel base frame that offers adequate protection to the centrally mounted aluminum analog load cell.
Supplied with an easy to use six digit LCD display that is housed in an extruded aluminum enclosure that can be either front mounted or pole mounted to the base.
A range of emulation protocols are available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party shipping software programs or host devices. This will be communicated through a single serial RS232, port found at the rear of the base.

  • Large 18 x 18 inch low profile base with remote display
  • Integrates with UPS Worldship and FedEx Ship Manager Software
  • Standard NCI default protocols
  • Pounds (default), Kilograms (factory set)
  • RS232 inferface
  • Ball top platter included
  • Optional remote pole display
  • Powder coated carbon steel base
  • NTEP certified legal for trade
  • 2 year warranty
Technical Specifications:
Capacity150 lbs
Readability0.05 lb
Pan Size18 x 18" (Ball-Top)
Connectivity1x RS232 (9 way female D Type connector ) positioned on the rear of the base
Supported ProtocolsStandard NCI default with field configurable settings of 8213, 3835, SMA,
with Auto Weight Send (1200 – 19.2K baud range) Transmits weight and scale
status whenever ASCII “W” <CR> is sent by a remote device.
Display TypeSix digit, ½” high LCD display housed in an extruded enclosure with a 7 foot cable,
connected via RJ 45 connector on the rear of the scale
Number of Displays Allowed1
Display Bracket OptionsStandard front mounted, using velcro strips to attach the remote display to base
A 12” high pole mounted display can be supplied as an optional extra
Remote Display Housing Sizes8” x 3” x 1.5”
Operational KeysZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference.
TEST: Runs a diagnostic test to ensure scale is fully functional and allows a real-time view of internal settings
AnnunciatorsZero
Units of Measurelb or kg (lb default)
Incremental SelectionsMultiples and sub-multiples of 1, 2, 5
Configurable SelectionsCapacity, resolution, lb or kg, filters, baud rates, protocols, auto printout, scale or post classifier
Default configuration is as postal weight classifier
Base Capacity150 x 0.05 lb (60 x 0.02 kg)
Base Size18” x 18” x 3” (457mm x 457mm 76mm)
Base ConstructionHard wearing, powder coated, 7 gauge, carbon steel weigh bridge and base plate,
aluminum NTEP approved analog load cell
Top Pan ConstructionStainless steel weight platter
Ball top weight platter (25 ball)
Ball Top Weight PlatterStainless steel, using 25 roller balls to simplify handling and transport of all parcels.
One piece lift-off design for easy field retrofit
FeetLockable adjustable feet, 1” diameter with up to 1” of height adjustment
Power120 VAC (+10% -15%), 60 Hz, standard 3-wire ground
Operating EnvironmentTemperature: 42°F to 104°F (5°C to 40°C)
Relative Humidity: 10 to 95% (non-condensing)
Calibration2 point calibration process (zero and span capacity)
Field calibration can be carried out by using less than full capacity weights
Gravity compensation to allow the local gravity to be entered for where the scale is to be used
Internal Resolution1 part in 120,000
FilteringFast or Slow
Self-Diagnostics2 level diagnostics: front panel display test or full service diagnostics.
(Display, RAM, ROM, input/output & high resolution x10 division test)
Pole MountOptional 12” high pole indicator stand, to allow easy viewing of the remote indicator
CertificationsUnited States: NTEP approved for use in Class III operations, CC #02-069
Canada: Canada Weights and Measures approval CC # AM-5507 Rev1