Advanced engineering and specialized construction techniques include variable density insulation, double shell cabinets, and long-life heating elements.
These Furnaces furnaces include unique insulation and heating element composites to minimize outer surface temperatures while maintaining uniform heat distribution within the chamber.,
- Includes: All models include 10' power cord except 1.5 cu. ft. models which require customer supplied power cord or hard wiring
- Warranty and Service Offering: 12 months
Features
- Two control options
- Controlled heat-up rate eliminates thermal shock to materials
- Quick heat-up and cool-down rates
- Energy efficient Moldatherm insulation with embedded heating elements
- Unique double-wall construction minimizes exterior surface temperatures for operator safety and energy efficiency
- Side-hinge door for convenient operation and full chamber access
- Long-life Type "K" thermocouple
- Air vent (1" dia., top) and air inlet (0.375" dia., rear) for inert atmosphere exchange. Will experience some leakage at door
- Removable and replaceable Moldatherm hearth plate supports load and prevents damage due to spillage
- Main power on/off switch on control panel
- Safety door switch to interrupt power to heating element when door is opened; protects heating element and minimizes exposure to end-user
- Available in 120V and 208/240V configurations
Digital, Single Setpoint Controller
- Microprocessor-based control with selectable self-tuning feature sets best control parameters for the thermal process. PID control (proportional, integral, derivative) prevents overshoot
- Single segment, single setpoint, 1 ramp to setpoint
- Adjustable high limit overtemperature protection
- Simultaneous LED display of actual temperature vs. setpoint
- May be configured to display temperature in either °C or °F
- UL approval
Digital Single Program, Multiple Segment Programmable Controller
- Microprocessor-based control with selectable self-tuning feature sets best control parameters for the thermal process. PID control (proportional, integral, derivative) prevents overshoot
- Single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control
- Adjustable high limit overtemperature protection
- Simultaneous LED display of actual temperature vs. setpoint
- May be configured to display temperature in either °C or °F
- UL approval
Optional RS485 Digital Communications Port
- RS485 Digital communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC